Split System Installation Windsor

Split System Installation in Windsor

There’s nothing more satisfying than coming to your home on a hot 40-degree day, switching on your split system air conditioning, and in a matter of minutes the house and your family is cool.

Split system air-conditioning provides this versatility, making them hard to beat. Like all heaters and coolers to make sure they’re running at their peak, they need to be checked and maintained at a high level by experienced professionals. Melbourne Gas Ducted Heating offers experienced technicians who are familiar with split system air conditioners inside and out. They specialise in all makes and models of these units offering you assurance that they will finish the job in a professional manner.

We offer a variety of services that include the following:

• Split System Installation Windsor
• Split System Repairs
• Split System Servicing

Our team of heating and cooling professionals are fully qualified and licensed for all sorts of tasks. If you’re looking for Split System Installation Windsor services then contact Local Heating and Cooling Professionals Windsor today and talk to one of our knowledgeable team members.

How Do Split Systems Work?

The split systems of air conditioning get their name because half of that system (condenser) located outside the home, while the other portion (fan coil) is located inside. When it cools, hot air that is inside the room is absorbed through the fan coil and taken out, resulting into cool air recirculating back into the house. While reverse cycle allows for your heat pump run in reverse in order to provide warmth during colder days.

Systems for split air conditioners are installed to specific rooms, areas , or rooms joined by copper piping to an outdoor unit (condenser). Multiple-headed split-air conditioning units can be used for up to nine rooms, with only one outdoor unit and allow for separate temperature control for each room.

What Are The Running Costs For Split Systems?

One of the brands we recommend to use for Split Systems is Mitsubishi Electric. For an Mitsubishi Electric GE Series 2.5KW Split System, installed in an unassuming room that provides regular cooling and heating during the summer and winter months The annual running expense would be $272.34.

The reduction of Costs of Split Systems Operating Costs

It’s easy to reduce your running costs by using the Split System. The model you buy, as well as its star rating will determine just how you’ll save each year. It is important to look beyond the initial cost to the way you use your Split System can help as well.

Tips For Operating Split Systems

• Set the thermostat to 24C and 26C for cooling. Every degree lower during summer will raise the cost of running by approximately 10%..
• Use the economy setting when your split has one. Ensure that you regularly service your air conditioning.
• Keep the sun’s heat away by closing curtains and blinds during the day. Close windows and doors to areas that are cooling when you have the split unit in operation.
• When the split system has been turned off and the cooler is outside, you can open doors and windows to let the cool air circulate.
• Insulate your property to help keep summer heat out and the cold inside in winter.
• Dress appropriately for the weather conditions.

Why Choose Split Systems?

The wall mounted air conditioning system is among the most commonly used residential air conditioning system, as they are affordable and easily to maintain.

Inverter Technology

Inverter technology is your best option for greater comfort throughout all seasons since it ensures a constant temperature, saves costs (less energy consumption) and creates a lot less sound when it is employed. This is achieved through managing the speed of the compressor more precisely.

Affordable

Wall-mounted split AC units are your most budget option for a small room or apartment because they are relatively inexpensive to buy (depending on the number of indoor units you require) and do not require installation of ducts.

Independent Temperature Control

Each indoor unit is able to regulate the space it is placed in, thus each room can have a different temperatures.

Air Quality

A lot of HVAC systems that are split include air filters and humidity control mechanisms that control the amount of dust and humidity in a room. This can provide those with sensitive conditions (children or elderly, asthmatic or allergic consumers) the peace of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems allow different indoor units to be connected to one outdoor condenser, which provides the convenience of having the best air conditioner (in terms of output and physical limitations) for a particular room.

Split System FAQ

Are split systems the same as an air conditioner?

Yes, Split System includes an air-conditioning unit. However, there are different kinds of air conditioning systems. This which include:

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

All these systems operate on electricity & refrigerant under the same principle, but are different in terms of how they are installed.

How long does it take to set up a split system air conditioner?

In general, a single split-system air conditioner installation should take 3-6 hours. But, the exact amount of time will depend on a variety of factors, such as below;

• Dimensions and position of both outdoor and indoor unit
• Copper pipes that are routed between outdoor and indoor units
• Electrical connections from main switchboard up to the AC unit.

More Split System FAQ's

Do I need to replace or fix my AC unit?

In the majority of cases in the event that your A/C is more than 10 years and you notice evident issues with the A/C There is a high likelihood that it is cheaper to replace then repair.

In order to help you make the right choice It is recommended to speak with the team at ComfyHome to get an honest opinion on the condition of your AC.

What size of split system air conditioner will I require?

A typical measurement ratio is to multiply the size of the room by a factor of 0.15 to get the needed power of the measurement unit in kilowatts.

If you have a room size of 40 square metres, you’ll have a Split system air conditioning unit with 6 kW. A cooling unit of 2.5kW is suitable for 10-20 sqm rooms areas.

However, the amount of the Split system’s required air conditioning can be affected by other variables such as the room insulation, amount of people residing there and’ position.

To get an accurate estimate of the Split Unit size please get in touch with us to request a thorough analysis.

More Split System FAQ's

How long does a split system air conditioner last?

In general an air conditioner is constructed to last for 10-20 years in the average. But this depends on a lot of things like the brand of the A/C, quality of the installation, routine service history etc…

It is important to service your split system air conditioner regularly to extend its lifespan and improve efficiency.

What is the best frequency to wash my air conditioner air filter?

Based on Daikin Australia, it is strongly recommended that you cleanse your air conditioning filters every 2 weeks to increase the efficiency of the system, and ultimately reduce your energy usage by 5%-15%.

Windsor Gas Heating Services

• Gas Appliance Servicing & Repair Windsor
• Gas Heating Installation Windsor
• Windsor
• Gas Heating Windsor
• Gas Heating Service Windsor
• Gas Space Heater Repair Windsor
• Gas Heating Repairs Windsor
• Ducted Gas Heating Servicing & Repair Windsor
• Brivis Ducted Gas Heating Servicing & Repair Windsor
• Gas Hot Water System Installation & Repairs Windsor
• Braemar Ducted Gas Heating Servicing & Repair Windsor
• Vulcan Ducted Gas Heating Servicing & Repair Windsor
• Carbon Monoxide Testing Windsor
• Gas Log Fire Service & Repairs Windsor
• Evaporative Cooling Repair Windsor

What Types of Systems We Service & Repair

Every brand and type of heating comes with its individual operation and maintenance requirements Our experienced technicians are knowledgeable and experience to offer excellent services across all kinds of heaters which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has years of experience with heating repair and maintenance that specialize in all kinds and models of heating systems. We are proud of our fast response time and dedication to excellence, efficiency and reliability.

We are able to maintain and service the majority of major brands of heating units and systems such as:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Competitive Prices You Can Trust
• Top Quality Workmanship, Guaranteed!
• Great Reputation & Reviews
• We’re friendly and personable.
• Highly Experienced and Licenced Team
• Request a Quote with No Obligation

Our Promise To You

At Melbourne Gas Ducted Heating we understand the discomfort of not having hot water. It’s a situation we believe no one should need to go through. This is the reason we place top priority on emergencies involving hot water. Our plumbers are courteous and reliable Without a doubt, we will be able to help you in any situation.

We are proud of our service to customers and it is our conviction that the little things matter the most.

We take pride in our exceptional customer service. this is why our customers appreciate us:

• We always show up when we promise to be there.
• Our techs will give you a the number to call them when they are thirty minutes away.
• Pricing upfront competitive and guidance before we start the job.
• Always taking care to clean up after ourselves.

The staff at Melbourne Gas Ducted Heating offer emergency and maintenance services for plumbing, electrical and heating. If you have questions about our services, and the services we can provide.