Split System Installation Balwyn

Split System Install in Balwyn

There’s nothing better than coming to your home on a hot day of 40 degrees and activating your split system air conditioning and in a matter of minutes the house and family members are cool.

Split system air-conditioning provides this flexibility, which makes them difficult to beat. Like all heaters and coolers that are required to run optimally they must be serviced and maintained in a professional manner by skilled professionals. Melbourne Gas Ducted Heating offers experienced technicians that know your split system air-conditioners in and out. They specialize in all models and models of these units and give you confidence that we will finish the job in a professional manner.

We offer a variety of services that include the following:

• Split System Installation Balwyn
• Split System Repairs
• Split System Servicing

Our team of heating and cooling professionals are fully qualified and licensed to handle all kinds of jobs. If you’re searching for split system installation in Balwyn services then contact Local Heating and Cooling Professionals Balwyn today and talk with one of our helpful team members.

How Do Split Systems Function?

Systems for split air conditioners get the name because of one half of this system (condenser) being outside the house , while the second half (fan coil) is installed inside. In cooling, hot air that is inside the room is brought in via the fan coil before being taken out, resulting into cool air being recirculated back into the home. Reverse cycle allows your heat pump run in reverse in order to provide warmth in cold weather.

The split system of air conditioning are placed in rooms, areas , or rooms that are connected via copper pipes with an outside unit (condenser). Systems with multi-head splits can be set up for up to nine rooms and only one outdoor unit and allow for the control of temperature for each room.

What Are The Ongoing Costs For Split Systems?

One of the brands we recommend to use for Split Systems is Mitsubishi Electric. For the Mitsubishi Electric GE Series 2.5KW Split System, installed in an unassuming room that provides regular cooling and heating during the summer and winter seasons, the annual running cost would be measured at $272.34.

The reduction of Split System Operating Costs

It doesn’t take much to save on running expenses with the Split System. The model you buy, as well as its star rating, you will be able to determine how much you’ll save per year. But looking beyond the initial cost to the way you will use the Split System can help as well.

Tips For Using Split Systems

• Set the thermostat to 24C and 26C to allow for cooling. Any degree lower than that will increase your running costs by 10%..
• Use the economy setting if your split system has one and regularly service your air conditioner.
• Keep the sun’s heat out by closing curtains as well as external blinds during the day. Close doors and windows to areas that are being cooled while the split system is running.
• If the split system is switched off and its cooler outside, open the doors along with windows, allowing cool air flow in.
• Insulate your property to help keep the summer heat out and the cold inside in winter.
• Dress appropriately for the weather conditions.

Why Choose Split Systems?

Air conditioning units mounted in wall are among the most commonly used residential air conditioning system because they’re affordable and simple to maintain.

Inverter Technology

Inverter technology is your mainstay for comfort all through the year because it maintains the temperature at a constant level, reduces costs (less energy consumption) and produces a lesser amount of noise when utilized. This is achieved by setting the speed of rotation more precisely.

Affordable

Wall mounted Split AC models are most affordable option for a one room, apartment or small house as they are relatively cheap to buy (depending on the number of indoor units you need) and they don’t require requirement for ductwork.

Independent Temperature Control

Each indoor unit has the ability to control the area it is placed in, which means that each room can have a different temperature.

Air Quality

Many HVAC systems that are split come with air filtering and humidity control features which control the amount dust and humidity inside the space. This provides those with sensitive skin (children older, asthmatic, or allergic consumers) an ease of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems allow different indoor units to be connected to one outdoor condenser which provides the convenience of having the most suitable air conditioner (in terms of output and physical restrictions) to a specific space.

Split System FAQ

Are split systems similar to an air conditioner?

Absolutely, Split System includes an air-conditioning unit. There are various kinds of air conditioning systems. This includes;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated air conditioner

All of them operate by using refrigerant and electricity. They all operate on the same principal but very different in terms of installation.

How long does it take to install a split system air conditioner?

In general an individual split air conditioning system installation is expected to last between 3 and 6 hours. But, the exact amount of time could vary based upon a number of variables, including below;

• Dimensions and position of both indoor and outdoor unit
• The route of copper pipes between the outdoor unit and the indoor unit
• Electrical connections from the main switchboard up to the AC unit.

More Split System FAQ's

Should I replace or repair my cooling system?

In most situation the air conditioner is over > 10-years-old and there are apparent issues with your air conditioner there’s a great possibility that it will be cheaper to replace then repair.

To help you make the right decision It is recommended to talk to the experts at ComfyHome for an honest assessment on the condition of your AC.

What size of split system air conditioner will I require?

A typical measurements ratio is multiple the room area by a factor of 0.15 in order to determine the power of the device in kilowatts.

If you have a room size that is 40 sqm, you’ll need a Split system air conditioning unit with 6 kW. A unit with a cooling capacity of 2.5kW is suitable for 10 -20 sqm room areas.

The size of the Split system air conditioning required will also be affected by other variables such as the insulation in the room, the size of the room, and’ locations.

For an accurate assessment of the needed Split dimension, please get in touch with us to request a thorough analysis.

More Split System FAQ's

How long can a split system air conditioner last?

In general, an air conditioner is constructed to last for 10-20 years in the an average. However, this is contingent upon a myriad of things like the manufacturer of the air conditioner, quality of the installation, routine service history and more…

It is vital to check the maintenance of the Split System air conditioner on a regular basis to extend its lifespan and improve efficiency.

When should I clean the air conditioner’s air filter?

As per Daikin Australia, it is strongly recommended to wash your air conditioner’s filters every 2 weeks to increase the efficiency of the system, and ultimately reduce your energy usage by 5 to 15 percent.

Balwyn Gas Heating Services

• Vulcan Ducted Gas Heating Servicing & Repair Balwyn
• Gas Heating Balwyn
• Gas Appliance Servicing & Repair Balwyn
• Gas Log Fire Service & Repairs Balwyn
• Gas Hot Water System Installation & Repairs Balwyn
• Balwyn
• Gas Heating Service Balwyn
• Gas Space Heater Repair Balwyn
• Gas Heating Installation Balwyn
• Ducted Gas Heating Servicing & Repair Balwyn
• Carbon Monoxide Testing Balwyn
• Evaporative Cooling Repair Balwyn
• Braemar Ducted Gas Heating Servicing & Repair Balwyn
• Gas Heating Repairs Balwyn
• Brivis Ducted Gas Heating Servicing & Repair Balwyn

What Types of Systems We Service & Repair

Each model and brand of heating system has its individual operation and maintenance requirements Our highly skilled technicians are knowledgeable and expertise to provide the best service to all systems of heating, which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team is well-versed and has years of experience in heating repairs and maintenance, specialising in all styles and brands of heating systems. We are proud of our quick response time and commitment to excellence, efficiency and reliability.

We are able to maintain and service the important brands of heating units and systems, including:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Low Prices You Can Trust
• Quality Workmanship Guaranteed
• Great Reviews & Reputation
• We’re Personable & Friendly
• Experienced & Licenced Team
• Request a Quote with No Obligation

Our Promise To You

At Melbourne Gas Ducted Heating we understand the discomfort of not having hot water. It’s a situation we don’t think anyone should suffer through. This is why we place top priority on hot water emergencies. Our plumbers are reliable and friendly We can assist with any emergency.

We are proud of our customer service and it is our belief that even the minor things matter most.

We pride ourselves on our great customer service, Here’s why our clients are so happy with us:

• We will always be there when we say we will.
• Our experts will give you the number to call them when they are 30 minutes away.
• Price upfront, competitive and professional advice before we begin the work.
• Always cleaning up after our own mess.

We at Melbourne Gas Ducted Heating offer emergency and maintenance services for plumbing, electrical and heating. If you have questions about our services and what we offer.