Split System Installation Selby

Split System Installation in Selby

There’s nothing more enjoyable than coming to your home on a hot 40 degree day turning on your split system air conditioning and in just a couple of minutes your house and your family are cool.

Split system air conditioning offers this versatility, which makes them tough to beat. But like all heaters and coolers to make sure they’re running at their peak, they need to be checked and maintained to a high standard by experienced professionals. Melbourne Gas Ducted Heating offers experienced technicians that know your split system air conditioners inside and out. They are experts in all makes and models giving you the assurance that they can get the job done to professional standards.

We provide a range of services that include the following:

• Split System Installation Selby
• Split System Repairs
• Split System Servicing

Our team of experts in heating and cooling are fully qualified and licensed to perform all kinds of tasks. If you’re looking for Split System Installation Selby services then contact Local Heating and Cooling Professionals Selby today and talk with one of our helpful team members.

How Do Split Systems Work?

Split air conditioning systems earn their name because half of it (condenser) being located outside the house , while the second part (fan coil) is located inside. In cooling, warm air in the room is taken in via the fan coil and taken out, resulting into cooling air returning to the house. The reverse cycle permits your heat pump operate in reverse, providing heating during cold days.

Split air conditioning systems can be fitted to individual rooms, zones or rooms joined by copper piping to an outdoor unit (condenser). Multi-head split air conditioning systems can be used for more than nine rooms, with only one outdoor unit, and allowing for the control of temperature for each room.

What Are The Running Costs For Split Systems?

One of our recommended brands of Split Systems is Mitsubishi Electric. If you are looking for the Mitsubishi Electric GE Series 2.5KW Split System, installed in the smallest of rooms, providing regular cooling and heating throughout the summer and winter time The annual running expense would be measured at $272.34.

The reduction of Split System Running Costs

It’s not difficult to reduce your running costs with the Split System. The model you buy, as well as its star rating, you will be able to determine how you’ll save each year. It is important to look beyond the initial cost to how you make use of it Split System can help as well.

Tips For Operating Split Systems

• Set the thermostat between 24C and 26C to allow for cooling. Any degree lower than that will increase your running costs by approximately 10%..
• Choose the economy option if your split system has one and regularly service your air conditioner.
• Keep the sun’s heat away by closing the curtains and exterior blinds during the day. Close windows and doors to areas that are cooled when the split system is in operation.
• If the split system is shut off and the cooler outside, it is recommended to open the doors along with windows, allowing the cool air circulate.
• Insulate your property to help keep the warm summer days out and cool in during winter.
• Wear clothes that are appropriate for the weather.

Why Choose A Split System?

The wall mounted air conditioning system is the most widely owned residential air conditioning system because they’re affordable and easily to maintain.

Inverter Technology

Inverter technology is the key to more comfort throughout the year because it maintains a constant temperature, saves costs (less consumption of energy) and creates a lot less noise when utilized. This is achieved by setting the speed of rotation more precisely.

Affordable

Wall-mounted split AC systems are the most economical option for a single room or apartment because they are relatively inexpensive to purchase (depending on the number of indoor units you will require) and there is no duct work required.

Independent Temperature Control

Each indoor unit has the ability to control the room that it is placed in, thus each room could have different temperature.

Air Quality

Many AC splits come with air filtering and humidity control features that control the amount of dust and humidity that can be found in the room. This allows for sensitive customers (children, elderly, asthmatic or allergic users) the peace of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems permit multiple indoor units to connect to a single outdoor condenser that in turn provides you with the comfort of having the best Air conditioner (in terms of physical and output constraints) for a particular room.

Split System FAQ

Is a split system similar to an air conditioner?

Absolutely, Split System is an air conditioning system. However, there are many kinds of air conditioning systems. This includes;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

All these systems operate with refrigerant and electricity under the same principal but very different in term of installation.

What is the time frame to set up a split system air conditioner?

In general for a single split-system air conditioner installation should last between 3 and 6 hours. But, the exact amount of time may vary based on many factors such as below;

• Location and size of both the outdoor and indoor unit
• The copper pipes are routed between the outdoor unit and indoor unit
• Electrical connections from main switchboard up to the AC unit.

More Split System FAQ's

Do I need to replace or fix my AC unit?

In most situation when your A/C is more than 10 years of age and has noticeable issues with your A/C there’s a great likelihood that it is cheaper to replace then repair.

To assist you in making the right decision, it is best to speak with the team at ComfyHome to give you an honest assessment on the condition of your air conditioner.

What size split system air conditioning do I need?

A typical measuring ratio will multiply the area of the room by a ratio of 0.15 in order to determine the power of the unit in kilowatt.

If you have a room size of 40 square metres, you’ll need a Split air conditioning system of 6 kW. A unit that can cool the air at 2.5kW is suitable for 10 -20 sqm room areas.

However, the amount of the Split system’s air conditioning requirements will also be affected by other variables like the room insulation, size of the room, and’ location.

To make an accurate determination of the Split units size please contact us for a comprehensive analysis.

More Split System FAQ's

What is the longest a split system air conditioner last?

In general an air conditioner is designed to last between 10 and 20 years in the average. However, it is contingent on a variety of elements, such as the manufacturer of the air conditioner as well as the quality of the installation, routine service history and more…

It is important to service the Split System air conditioner regularly for a longer life span and to increase efficiency.

Do I need to wash my air conditioner air filter?

As per Daikin Australia, it is strongly recommended that you clean your air conditioning filters every two weeks to improve the efficiency of the system, and ultimately reduce energy consumption by 5 to 15%.

Selby Gas Heating Services

• Gas Heating Installation Selby
• Carbon Monoxide Testing Selby
• Evaporative Cooling Repair Selby
• Selby
• Gas Appliance Servicing & Repair Selby
• Brivis Ducted Gas Heating Servicing & Repair Selby
• Gas Hot Water System Installation & Repairs Selby
• Gas Heating Service Selby
• Ducted Gas Heating Servicing & Repair Selby
• Vulcan Ducted Gas Heating Servicing & Repair Selby
• Gas Space Heater Repair Selby
• Gas Log Fire Service & Repairs Selby
• Braemar Ducted Gas Heating Servicing & Repair Selby
• Gas Heating Repairs Selby
• Gas Heating Selby

What Types of Systems We Service & Repair

Every brand and type of heating comes with its specific operation and maintenance needs Our skilled technicians are knowledgeable and experience to offer top-quality services to all systems of heating, which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has many years experience in the field of heating repairs and maintenance and specialize in all types and models of heating systems. We pride ourselves on a fast response time and dedication to efficiency, excellence and reliability.

We are able to maintain and service the majority of leading brands of heating systems and units that include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Great Prices You Can Trust
• Professional Quality Workmanship Assurance
• Excellent Reputation & Reviews
• We’re friendly, personable and polite.
• A Team of Experienced and Licenced Professionals
• Get a Quote Without Costs

Our Promise To You

We at Melbourne Gas Ducted Heating we understand the inconvenience of not having any hot water and it’s something that we would never want anyone to suffer through. That’s why we give an emphasis on emergencies with hot water. Our plumbers are courteous and reliable Without a doubt, we are able to assist you in any circumstance.

We are proud of the quality of our customer service. It is our belief that the minor things matter most.

We pride ourselves on our outstanding customer service. here’s why our customers appreciate us:

• We always show up when tell you we will.
• Our staff will give you an appointment when they are thirty minutes away.
• Price upfront, competitive and professional advice before we start the job.
• Always making sure we clean up after us.

We at Melbourne Gas Ducted Heating offer emergency and maintenance services in plumbing, electrical and heating. If at any time you have some questions about our services and the products we can offer, please contact us.