Split System Installation Montrose

Split System Installation in Montrose

There’s nothing more enjoyable than coming home from a scorching 40 degree day activating your split system air conditioning and in a matter of seconds, the house and your family will be cool.

Split system air conditioning offers this the ability to be used in a variety of ways, making them difficult to beat. However, like all heaters and coolers to make sure they’re running at their best they should be serviced and maintained in a professional manner by skilled professionals. Melbourne Gas Ducted Heating offers experienced technicians who know split system air conditioners in and out. They specialize in all brands and models of these units and give you assurance that they will complete the task to a professional standard.

We offer a variety of services, which include the following:

• Split System Installation Montrose
• Split System Repairs
• Split System Servicing

Our team of experts in heating and cooling is licensed and qualified to handle all kinds of tasks. If you’re looking for Split System Installation Montrose services then contact Local Heating and Cooling Professionals Montrose today and talk with one of our friendly team members.

How Do Split Systems Work?

Air conditioning splits have their name because of half this system (condenser) is located outside of the house while the other half (fan coil) is located inside. In cooling, warm air in the room is absorbed by the fan coil and removed, resulting in cool air recirculating back into the house. In reverse mode, it allows the heat pump to run in reverse to provide heating on cold winter days.

Split air conditioning systems can be installed in individual rooms, zones or rooms linked by copper pipe into an outdoor unit (condenser). Systems with multi-head splits can be used in at least nine rooms with only one outdoor unit and allow for individual temperature control of each room.

What Are The Running Costs For Split Systems?

One of the most recommended brands of Split Systems is Mitsubishi Electric. For the Mitsubishi Electric GE Series 2.5KW Split System, installed in an unassuming room that provides regular heating & cooling during the summer and winter seasons The annual running expense would be $272.34.

Reducing Split System Running Costs

It’s not hard to cut down on your operating costs by using a Split System. Depending on the model that you buy, as well as its star rating will determine how much you’ll save per year. It is important to look beyond the initial cost and how you will use the Split System can help as well.

Tips For Using A Split System

• Set the thermostat between 24C and 26C for cooling. Any degree lower than that will increase your running costs by about 10%..
• Utilize the economy setting If your split system comes with one. Ensure that you regularly service your air conditioning.
• Keep the sun’s heat away by closing the curtains and exterior blinds during the daytime. Close windows and doors to areas that are cooled when your split systems are in operation.
• When the split system has been switched off and its cooler outside, open the doors as well as windows in order to let cool air flow in.
• Insulate your house to block heat out in summer and inside during winter.
• Dress appropriately for the weather.

Why Select A Split System?

The wall mounted air conditioning system is among the most commonly used residential air conditioning system, as they are affordable and easily to maintain.

Inverter Technology

Inverter technology is your most effective way to enjoy more comfort throughout the year since it keeps the temperature constant, cuts costs (less consumption of energy) and creates a lot less sound when it is utilized. This is achieved by control of the compressor’s rotation speed more precisely.

Affordable

Wall mounted wall mounted split AC system are most economical option for a single room apartment or small house as they are comparatively inexpensive to buy (depending on how many indoor units you’ll need) and don’t need duct work required.

Independent Temperature Control

Each indoor unit has the ability to control the temperature of the room it is located in, so each room can have a distinct temperature.

Air Quality

Many Split air conditioners come with air filters and humidity control mechanisms which regulate the amount of dust and humidity that can be found in the room. This allows for sensitive customers (children and elderly, asthmatic or allergic customers) the peace of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems permit multiple indoor units to connect to one outdoor condenser, that in turn provides you with the peace of mind that you have the most suitable Air conditioner (in terms of output and physical constraints) for the room you are in.

Split System FAQ

Are split systems the same as an air conditioner?

Absolutely, Split System can be described as an air conditioner system. There are various kinds of air conditioning systems. It include;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated air conditioner

Each of these systems operates with refrigerant and electricity under the same principle, but are different in terms of installation.

What is the time frame to install a split system air conditioner?

In general, a single split-system air conditioner installation will take between 3-6 hours. But, the exact amount of time could vary based on various factors like the following:

• Dimensions and position of both outdoor and indoor unit
• The copper pipes are routed between indoor and outdoor unit
• Electrical connections from main switchboard to the A/C unit.

More Split System FAQ's

Should I replace or repair my cooling system?

In the majority of cases, if your A/C is more than 10-years-old and you have evident issues with the A/C, there is a good likelihood that it is cheaper to replace then repair.

To help you make the best decision It is recommended to talk to the experts at ComfyHome to provide you with an honest assessment on the state of your air conditioner.

What size split system air conditioning do I need?

A standard measurement ratio is to multiple the area of the room by a factor of 0.15 to get the needed power of the unit in kilowatt.

For a room with a size that is 40 sqm, you’ll have a Split system air conditioning unit that is 6 kW. A cooling unit of 2.5kW is perfect for rooms with 10-20 square meters. spaces.

However, the amount of the Split system air conditioning required will also be dependent on other factors such as the room insulation, size of the room, and’ position.

To make an accurate determination of the needed Split unit size, please contact us for a detailed analysis.

More Split System FAQ's

How long does a split system air conditioner last?

In general air conditioners are designed to last between 10 and 20 years on average. But this depends on a lot of factors such as the brand of the A/C and the quality of the installation, the routine maintenance history etc…

It is crucial to maintain your split system air conditioner regularly to extend its life and increase effectiveness.

How often should I clean my air conditioner air filter?

Based on Daikin Australia, it is strongly suggested that you should clean your air conditioning filters every two weeks in order to boost the efficiency of your system and possibly reduce energy consumption by 5 to 15%.

Montrose Gas Heating Services

• Vulcan Ducted Gas Heating Servicing & Repair Montrose
• Gas Hot Water System Installation & Repairs Montrose
• Gas Heating Repairs Montrose
• Carbon Monoxide Testing Montrose
• Gas Heating Service Montrose
• Gas Heating Installation Montrose
• Gas Space Heater Repair Montrose
• Ducted Gas Heating Servicing & Repair Montrose
• Evaporative Cooling Repair Montrose
• Montrose
• Gas Appliance Servicing & Repair Montrose
• Gas Log Fire Service & Repairs Montrose
• Braemar Ducted Gas Heating Servicing & Repair Montrose
• Gas Heating Montrose
• Brivis Ducted Gas Heating Servicing & Repair Montrose

What Types of Systems We Service & Repair

Every brand and type of heating comes with its own operation and maintenance Our highly skilled technicians have the knowledge and know how to provide first rate services for all heating systems which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has years of experience in the field of heating repairs and maintenance, specialising in all styles and brands of heating equipment. We are proud of our rapid response time and dedication to excellence, efficiency , and reliability.

We are able to maintain and service all major brands of heating systems and units that include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Competitive Prices You Can Trust
• Top Quality Workmanship, Guaranteed!
• Excellent Reviews & Reputation
• We’re Personable & Friendly
• Professionally trained and licensed team
• Get a Quote With No obligation

Our Promise To You

We at Melbourne Gas Ducted Heating we understand the difficulty of not having hot water, and it’s something that we would never want anyone to suffer through. This is why we put top priority on hot water emergencies. All of our experienced plumbers are reliable and friendly We can assist you in any circumstance.

We pride ourselves on our customer service , and it is our conviction that the little things matter the most.

We are proud of our outstanding customer service. here’s why our customers are so happy with us:

• We always arrive when we say we will.
• Our techs will give you a a call when they are 30 minutes away.
• Upfront competitive pricing and advice before we even begin the job.
• Always cleaning up after us.

The staff at Melbourne Gas Ducted Heating offer emergency and maintenance services for plumbing, electrical, and heating. If you have questions about our services or what we can provide.