Split System Installation Kew

Split System Install in Kew

There’s nothing more satisfying than coming home on a hot 40-degree day, switching on your split system air-conditioning and within a matter of seconds, the house and family members are cool.

Split system air-conditioning provides this versatility, which makes them tough to beat. But like all heaters and coolers, to ensure they are operating at their peak, they need to be maintained and serviced to a high standard by experienced professionals. Melbourne Gas Ducted Heating offers experienced technicians who know split system air conditioners from top to bottom. They specialize in all brands and models of these units giving you the peace of mind that we will finish the job in a professional manner.

We offer a wide range of services that include the following:

• Split System Installation Kew
• Split System Repairs
• Split System Servicing

Our team of heating and cooling professionals are fully qualified and licensed to complete all types of jobs. If you are looking for split system installation Kew services then contact Local Heating and Cooling Professionals Kew today and talk to one of our knowledgeable team members.

How Do Split Systems Operate?

The split systems of air conditioning are the name because of one half of that system (condenser) being outside the home, while the other part (fan coil) is located inside. When cooling, the warm air inside the room is brought in by the fan coil and is then removed, which results in cooling air returning to the home. While reverse cycle allows for the heat pump to run in reverse to provide heating during colder days.

Split air conditioning systems are installed to specific rooms, areas , or rooms that are connected via copper pipes to an outdoor unit (condenser). Split air conditioners with multiple heads can be set up in at least nine rooms using only one outdoor unit and allowing for the control of temperature for each room.

What Are The Running Costs With Split Systems?

One of the top brands to use for Split Systems is Mitsubishi Electric. For the Mitsubishi Electric GE Series 2.5KW Split System, installed in an unassuming room that provides regular cooling and heating throughout the summer and winter time The annual operating cost is $272.34.

Reducing Costs of Split Systems Operating Costs

It’s easy to save on running expenses with the Split System. Depending on the model you purchaseand its star rating will determine how you’ll save each year. It is important to look beyond the initial cost to how you use your Split System can help as well.

Tips For Using A Split System

• Set the thermostat to 24C and 26C to allow for cooling. Any degree lower than that will increase the running costs by 10%..
• Choose the economy option when your split has one and regularly service your air conditioning.
• Make sure that the sun’s heat is kept out by closing the curtains and exterior blinds in the morning. Close the doors and windows of areas that are cooling when your split systems are on.
• If the split system is shut off and the cooler outside, open the doors along with windows, allowing cool air flow in.
• Insulate your home to keep the warm summer days out and cool inside during winter.
• Dress according to the weather.

Why Choose Split Systems?

Air conditioning units mounted in wall are the most widely owned residential air conditioning system because they are cost-effective and easily to maintain.

Inverter Technology

Inverter technology is your most effective way to enjoy more comfort throughout the year as it maintains the temperature at a constant level, reduces costs (less energy consumption) and creates a lot less noise when it is used. This is accomplished by control of the compressor’s rotation speed more precisely.

Affordable

Wall-mounted divided AC units are your best budget option for a small room, apartment or small house as they are relatively cheap to buy (depending on the number of indoor units you’ll need) and there is no duct work required.

Independent Temperature Control

Each indoor unit has the ability to control the temperature of the room it is installed in, thus each room may have various temperature.

Air Quality

A lot of split air conditioning systems come with air filtering and humidity control functions which regulate the amount of dust and humidity that can be found in a room. This allows for sensitive customers (children or elderly, asthmatic or allergic users) an unwinding mind and body.

Multi-Head Split Systems

Multi-Head Split Systems allow different indoor units to be connected to one outdoor condenser, which gives you satisfaction of having the perfect air conditioner (in terms of physical and output constraints) for the room you are in.

Split System FAQ

Is a split system similar to an air conditioner?

Absolutely, Split System is an air conditioning system. But, the different kinds of air conditioning systems. This include;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated air conditioner

All of them operate on electricity & refrigerant under the same principal but very different in term of installation.

How long will it take to install a split-system air conditioner?

Generally speaking for a single split air conditioning system installation should last between 3 and 6 hours. But, the exact amount of time may vary based on various factors like below:

• Size and location of both the outdoor and indoor unit
• Copper pipes that are routed between outdoor and indoor units
• Electrical connections from main switchboard to the A/C unit.

More Split System FAQ's

Should I replace or repair my air conditioner?

In the majority of cases, if your air conditioner is more than 10-years-old and you notice apparent issues with your air conditioner, there is a good chance that it could be less expensive to replace it than to repair it.

To assist you in making the right decision It is recommended to speak with the team at ComfyHome to get an honest evaluation of the state of your air conditioner.

What size split system air conditioning do I need?

A typical measurement ratio is to multiple the area of the room by a factor of 0.15 to get the needed power of the unit in Kilowatts.

For a space that is 40 sqm, you’ll require a split system air conditioning unit of 6 kW. A unit that can cool the air at 2.5kW is perfect for 10-20 square meter room spaces.

The size of the Split system’s air conditioning requirements will also be affected by other factors like the room insulation, amount of people residing there and’ position.

To get an accurate estimate of the necessary Split units size we recommend you get in touch with us to request a thorough analysis.

More Split System FAQ's

How long does a split system air conditioner last?

In general the air conditioner is built to last 10-20 years on average. However, this is contingent upon a myriad of factors such as the brand of the A/C, quality of the installation, regular service history, and so on…

It is vital to check the maintenance of the Split System air conditioner often for a longer life span and to increase effectiveness.

Do I need to clean my air conditioner’s air filter?

Based on Daikin Australia, it is highly recommended that you take care to clean your air conditioning filter every two weeks in order to boost the efficiency of the system and reduce energy consumption by 5 to 15 15%.

Kew Gas Heating Services

• Gas Space Heater Repair Kew
• Gas Heating Repairs Kew
• Gas Heating Installation Kew
• Gas Appliance Servicing & Repair Kew
• Evaporative Cooling Repair Kew
• Brivis Ducted Gas Heating Servicing & Repair Kew
• Kew
• Gas Hot Water System Installation & Repairs Kew
• Braemar Ducted Gas Heating Servicing & Repair Kew
• Gas Heating Service Kew
• Gas Log Fire Service & Repairs Kew
• Ducted Gas Heating Servicing & Repair Kew
• Gas Heating Kew
• Carbon Monoxide Testing Kew
• Vulcan Ducted Gas Heating Servicing & Repair Kew

What Types of Systems We Service & Repair

Each brand and style of heating comes with its individual operation and maintenance requirements Our highly skilled technicians are knowledgeable and experience to offer the best service to all systems of heating including:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has many years experience in heating repairs and maintenance, specialising in all styles and brands of heating systems. We take pride in a fast response time and dedication to excellence, efficiency , and reliability.

We are able to service and maintain the major brands of heating units and systems that include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Great Prices You Can Trust
• Top Quality Workmanship, Guaranteed!
• Excellent Reviews & Reputation
• We’re Personable & Friendly
• Experienced & Licenced Team
• Request a Quote with No obligation

Our Promise To You

At Melbourne Gas Ducted Heating we understand the inconvenience of not having any hot water. It’s a situation we do not believe anyone should need to go through. This is why we put top priority for hot water emergencies. Our experienced plumbers are friendly and trustworthy, without a doubt we can assist with any emergency.

We take pride in our service to customers and it is our conviction that the tiny things are the most important.

We pride ourselves on our outstanding customer service. this is why our customers love us:

• We will always be there when we declare that we will.
• Our experts will give you an appointment when they are thirty minutes away.
• Competitive pricing upfront and expert advice before we begin the work.
• Always getting our hands clean after us.

The staff at Melbourne Gas Ducted Heating offer emergency and maintenance services for plumbing, electrical and heating. If at any time you are unsure about our services and what we can provide.