Split System Installation Clayton

Split System Install in Clayton

There’s nothing better than coming home on a hot day of 40 degrees and activating your split system air-conditioning and within a matter of seconds, the house and your family are cool.

Split system air conditioning provides such flexibility, which makes them difficult to beat. Like all heaters and coolers that are required to run at their peak they must be serviced and maintained to a high standard by qualified experts. Melbourne Gas Ducted Heating offers experienced technicians who are familiar with split system air conditioners from top to bottom. They specialize in all brands and models of these units and give you peace of mind that we will complete the task to a professional standard.

We offer a wide range of services, which include the following:

• Split System Installation Clayton
• Split System Repairs
• Split System Servicing

Our team of heating and cooling professionals is licensed and qualified to perform all kinds of jobs. If you are looking for split system installation in Clayton services then contact Local Heating and Cooling Professionals Clayton today and talk with one of our helpful team members.

How Do Split Systems Operate?

Air conditioning splits are the name because of one half of the system (condenser) being outside the house , while the second portion (fan coil) is inside. In cooling, warm air inside the room is taken in via the fan coil and taken out, resulting into cool air recirculating back into the home. The reverse cycle permits your heat pump operate in reverse, providing heating during cold days.

Split air conditioning systems are installed in individual rooms, areas or multiple rooms linked by copper pipe connecting to the outdoor unit (condenser). Multi-head split air conditioning systems are able to be fitted for more than nine rooms with just one outdoor unit as well as allowing individual temperature control of each room.

What Are The Running Costs For Split Systems?

One of our recommended brands of Split Systems is Mitsubishi Electric. If you are looking for an Mitsubishi Electric GE Series 2.5KW Split System, installed in a small room providing regular cooling and heating during the summer and winter seasons and the annual running costs would be measured at $272.34.

Reducing the Split System Running Costs

It’s not difficult to cut down on your operating costs by using the Split System. Depending on the model you purchaseand its star rating, you will be able to determine how much you can save annually. It is important to look beyond the initial cost to the way you will use it Split System can help as well.

Guide to Using A Split System

• Set the thermostat between 24C and 26C to cool. Every degree lower during summer will increase your running costs by 10%..
• Use the economy setting If your split system comes with one. Ensure that you regularly service your air conditioner.
• Keep the sun’s heat away by closing curtains and blinds in the morning. Close the doors and windows of areas that are cooling when your split systems are in operation.
• When the split system is switched off and its cooler outside, you can open doors along with windows, allowing cool air inside.
• Insulate your house to block the cool summer air out and keep the heat inside in winter.
• Dress according to the weather conditions.

Why Choose A Split System?

Air conditioning units mounted in wall are the most commonly used air conditioning systems for homes because they are cost-effective and easily to maintain.

Inverter Technology

Inverter technology is the most effective way to enjoy more comfort throughout the year because it maintains the temperature constant, cuts costs (less energy use) and creates a lot less sound when it is it is used. This is achieved through setting the speed of rotation more precisely.

Affordable

Wall mounted divided AC systems are the most affordable option for a one room apartment or small house as they are relatively cheap to buy (depending on the number of indoor units you require) and do not require installation of ducts.

Independent Temperature Control

Each indoor unit is able to regulate the space it is installed within, and each space may have different temperatures.

Air Quality

A lot of AC splits feature air filters and humidity control mechanisms which control the amount dust and humidity that can be found in a room. This provides those with sensitive skin (children, elderly, asthmatic or allergic customers) the peace of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems allow multiple indoor units to be connected to one outdoor condenser which gives you satisfaction of having the perfect air conditioner (in terms of output and physical limitations) for the room you are in.

Split System FAQ

Is a split system the same thing as one would expect from an air conditioner?

Absolutely, Split System can be described as an air conditioner system. There are various kinds of air conditioning systems. It that include

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated air conditioner

Each of these systems operates by using refrigerant and electricity. They all operate on the same principal but very different in term of installation.

What is the time frame to install a split system air conditioner?

In general, a single split air conditioning system installation should take between 3-6 hours. The exact length of time will depend on various factors like below:

• Location and size of both the outdoor and indoor unit
• The routing of copper pipes between the outdoor unit and the indoor unit
• Electrical connections from main switchboard up to the AC unit

More Split System FAQ's

Should I replace or repair my AC unit?

In the majority of situations the A/C is more than 10-years-old and you notice noticeable issues with your A/C there’s a good likelihood that it is cheaper to replace then repair.

In order to help you make the best decision, it is best to talk to the experts at ComfyHome for an honest opinion on the condition of your AC.

What size split system air conditioning will I require?

A typical measurement ratio is to multiply the space by a factor of 0.15 to obtain the required power of the measurement unit in kilowatts.

If you have a room size of 40 square meters, you will have a Split system air conditioning unit that is 6 kW. A unit that can cool the air at 2.5kW is suitable for 10-20 sqm rooms areas.

However, the amount of the Split system’s air conditioning is also affected by other factors like the room insulation, size of the room, and’ location.

For an accurate assessment of the needed Split unit size, we suggest you contact us for a detailed analysis.

More Split System FAQ's

What is the longest an air conditioner split system last?

In general an air conditioner is built to last from 10-20 years in the an average. However, this is contingent upon a myriad of factors such as the manufacturer of the air conditioner and the quality of the installation, routine service history etc…

It is vital to check the maintenance of your split system air conditioner regularly to extend its life and increase effectiveness.

How often should I clean my air conditioner air filter?

Based on Daikin Australia, it is strongly recommended that you cleanse your air conditioning filters every two weeks to improve the efficiency of the system, and ultimately reduce your energy usage by 5%-15 percent.

Clayton Gas Heating Services

• Gas Heating Clayton
• Gas Appliance Servicing & Repair Clayton
• Gas Heating Installation Clayton
• Vulcan Ducted Gas Heating Servicing & Repair Clayton
• Carbon Monoxide Testing Clayton
• Clayton
• Gas Hot Water System Installation & Repairs Clayton
• Gas Space Heater Repair Clayton
• Brivis Ducted Gas Heating Servicing & Repair Clayton
• Gas Heating Service Clayton
• Gas Heating Repairs Clayton
• Ducted Gas Heating Servicing & Repair Clayton
• Gas Log Fire Service & Repairs Clayton
• Braemar Ducted Gas Heating Servicing & Repair Clayton
• Evaporative Cooling Repair Clayton

What Types of Systems We Service & Repair

Each brand and style of heating requires its own maintenance and operation Our skilled technicians have the knowledge and experience to offer first rate services for all heating systems which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has a wealth of experience in heating repairs and maintenance that specialize in all kinds and types of heating systems. We are proud of our rapid response time as well as a commitment to excellence, efficiency , and reliability.

We are able to maintain and service the top brands of heating systems and units that include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Great Prices You Can Trust
• Quality Workmanship Guaranteed
• Excellent Reputation & Reviews
• We’re friendly and personable.
• Experienced & Licenced Team
• Request a Quote with No obligation

Our Promise To You

We at Melbourne Gas Ducted Heating we understand the discomfort of not having hot water and it’s something that we would never want anyone to have to experience. This is why we place such a high priority for hot water emergencies. Our plumbers are friendly and trustworthy We will be able to assist you in any circumstance.

We are proud of our service to customers and it is our belief that even the small things count the most.

We are proud of our excellent customer service. this is why our customers are so happy with us:

• We always arrive when we say we will.
• Our techs will give you a an appointment when they are thirty minutes away.
• Price upfront, competitive and professional advice before we even begin the job.
• Always taking care to clean up after our own mess.

At Melbourne Gas Ducted Heating offer emergency and maintenance services for plumbing, heating, and electrical. If you are unsure about our services or what we offer.