Split System Installation Belgrave

Split System Install in Belgrave

There’s nothing better than coming home on a hot 40 degree day turning on your split system air conditioning, and in a matter of minutes the house and family members are cool.

Split system air-conditioning provides this versatility, which makes them tough to beat. But , just like all heaters or coolers to make sure they’re running at their peak they should be checked and maintained in a professional manner by skilled professionals. Melbourne Gas Ducted Heating offers experienced technicians who are familiar with split system air conditioners in and out. They specialise in all makes and models of these units giving you the peace of mind that we can get the job done to professional standards.

We provide a variety of services, which include the following:

• Split System Installation Belgrave
• Split System Repairs
• Split System Servicing

Our team of experts in heating and cooling are licensed and fully trained for all sorts of jobs. If you’re looking for split system installation in Belgrave services then contact Local Heating and Cooling Professionals Belgrave today and talk with one of our helpful team members.

How Do Split Systems Function?

Split air conditioning systems get their name due to half it (condenser) is located outside of the home, while the other part (fan coil) is installed inside. While cooling, warm air from inside the room is brought in by the fan coil, and then is then removed, which results in cool air being recirculated back into the home. In reverse mode, it allows your heat pump operate in reverse, providing heating on cold winter days.

The split system of air conditioning are installed to specific rooms, zones or rooms that are connected via copper pipes connecting to the outdoor unit (condenser). Systems with multi-head splits are able to be fitted in as many as nine rooms and only one outdoor unit and allowing for the control of temperature for each room.

What Are The Running Costs For Split Systems?

One of the top brands of Split Systems is Mitsubishi Electric. If you are looking for an Mitsubishi Electric GE Series 2.5KW Split System, installed in an area that is small, and provides regular heating & cooling during the summer and winter time The annual operating cost is $272.34.

Lowering the Split System Running Costs

It’s not difficult to save on running expenses by using the Split System. Depending on the model you buy, as well as its star rating will determine just how much you can save annually. However looking beyond the initial cost and how you use the Split System can help as well.

Guide to Operating A Split System

• Set the thermostat to 24C and 26C to allow for cooling. Each degree less in summer increases the running cost by 10%..
• Make use of the economy setting If your split system comes with one. Ensure that you regularly service your air conditioner.
• Make sure that the sun’s heat is kept out by closing curtains and external blinds in the morning. Close windows and doors to areas that are cooling when you have the split unit on.
• When the split system has been switched off and its cooler outside, open the doors and windows to let cool air circulate.
• Insulate your residence to prevent cool summer air out and keep the heat in during winter.
• Dress appropriately for the weather.

Why Choose A Split System?

Wall mounted split air conditioning systems are the most widely owned residential air conditioning system since they are inexpensive and easily to maintain.

Inverter Technology

Inverter technology is the most effective way to enjoy more comfort throughout the year since it keeps the temperature constant, cuts costs (less consumption of energy) and produces relatively less noise when employed. This is achieved through controlling the compressor rotation speed more precisely.

Affordable

Wall-mounted Split AC units are your best economical option for a single room apartment, small home or even a studio since they are inexpensive to purchase (depending on the number of indoor units you require) and they don’t require duct work required.

Independent Temperature Control

Each indoor unit is able to regulate the space it is situated within, and each space can have a different temperature.

Air Quality

A lot of split air conditioning systems come with air filtering functions and humidity control that regulate the amount of dust and humidity in the space. This provides those with sensitive skin (children, elderly, asthmatic or allergic customers) peace of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems permit multiple indoor units to be connected to one outdoor condenser, which gives you the comfort of having the ideal AC (in terms of output and physical restrictions) for a specific room.

Split System FAQ

Is a split system the same thing as one would expect from an air conditioner?

Sure, Split System is an air conditioning system. But, the different kinds of air conditioning systems. These includes;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated air conditioner

Each system operates with refrigerant and electricity under the same principal but very different in terms.

How long does it take to install a split-system air conditioner?

Generally speaking the typical AC split installation is expected to last between 3 and 6 hours. But, the exact amount of time may vary based upon a number of variables, including below:

• Dimensions and position of both indoor and outdoor unit
• Copper pipes that are routed between indoor and outdoor unit
• Electrical connections from the main switchboard to the A/C unit.

More Split System FAQ's

Should I replace or repair my AC unit?

In the majority cases the air conditioner is over > 10-years-old and you notice noticeable issues with your A/C there’s a good chance that it could be more affordable to replace than repair.

In order to help you make the right choice, it is best to speak with the team at ComfyHome to get an honest evaluation of the state of your air conditioner.

What size split system air conditioning do I need?

The standard measurements ratio is multiple the size of the room by a ratio of 0.15 in order to determine the power of the measurement unit in kilowatts.

For a room with a size of 40 square metres, you’ll need a Split system air conditioning unit with 6 kW. An air conditioning unit of 2.5kW is suitable for 10 -20 sqm room areas.

The size of the Split system’s required air conditioning can also be affected by other factors like the room insulation, number of occupants and residents’ position.

To make an accurate determination of the required Split units size we suggest you contact us for a comprehensive analysis.

More Split System FAQ's

What is the longest an air conditioner split system last?

In general, an air conditioner is built to last 10-20 years in the an average. However, it is contingent on a variety of elements, such as the brand of the A/C and the quality of the installation, regular service history, and so on…

It is crucial to maintain the Split System air conditioner frequently to extend its lifespan and improve effectiveness.

Do I need to wash my air conditioner’s air filter?

As per Daikin Australia, it is strongly recommended that you clean your air conditioning filters every two weeks to improve the efficiency of the system and reduce your energy consumption by 5 to 15 15%.

Belgrave Gas Heating Services

• Evaporative Cooling Repair Belgrave
• Gas Heating Repairs Belgrave
• Gas Heating Service Belgrave
• Gas Heating Belgrave
• Gas Appliance Servicing & Repair Belgrave
• Belgrave
• Gas Space Heater Repair Belgrave
• Vulcan Ducted Gas Heating Servicing & Repair Belgrave
• Gas Heating Installation Belgrave
• Brivis Ducted Gas Heating Servicing & Repair Belgrave
• Gas Hot Water System Installation & Repairs Belgrave
• Gas Log Fire Service & Repairs Belgrave
• Carbon Monoxide Testing Belgrave
• Braemar Ducted Gas Heating Servicing & Repair Belgrave
• Ducted Gas Heating Servicing & Repair Belgrave

What Types of Systems We Service & Repair

Each brand and style of heating requires its own operation and maintenance; our experienced technicians are knowledgeable and expertise to provide top-quality services on all types of heating equipment, which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has many years experience with heating repair and maintenance that specialize in all kinds and brands of heating systems. We take pride in a rapid response time and dedication to excellence, efficiency and reliability.

We are able to service and maintain the majority of top brands of heating units and systems, including:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Competitive Prices You Can Trust
• Professional Quality Workmanship Assurance
• Great Reputation & Reviews
• We’re friendly, personable and polite.
• Highly Experienced and Licenced Team
• Get a Quote Without Obligation

Our Promise To You

We at Melbourne Gas Ducted Heating we understand the discomfort of not having hot water. It’s a situation that we would never want anyone to have to experience. That’s why we give such a high priority on emergencies with hot water. Our plumbers are friendly and trustworthy, without a doubt we can assist you in all situations.

We pride ourselves on our service to customers and it is our firm belief that the little things matter the most.

We pride ourselves on our great customer service, here’s why our customers love us:

• We always arrive when we say we will.
• Our experts will give you the number to call them when they are 30 minutes away.
• Upfront competitive pricing and advice before we start the job.
• Always cleaning up after us.

At Melbourne Gas Ducted Heating offer emergency and maintenance services for plumbing, heating, and electrical. If at any time you have questions about our services or what we offer.