Split System Installation Bayswater

Split System Installation in Bayswater

There’s nothing better than coming home on a hot day of 40 degrees and turning on your split system air conditioning and in just a couple of seconds, the house and family members are cool.

Split system air conditioning provides such versatility, making them hard to beat. Like all heaters and coolers that are required to run optimally they must be serviced and maintained to the highest standard by skilled professionals. Melbourne Gas Ducted Heating offers experienced technicians who know split system air-conditioners from top to bottom. They are experts in all makes and models providing you with peace of mind that we will complete the task in a professional manner.

We provide a range of services that comprise the following:

• Split System Installation Bayswater
• Split System Repairs
• Split System Servicing

Our team of professionals in the field of heating and cooling is licensed and qualified to handle all kinds of jobs. If you’re searching for [keywords lower] Bayswater services then contact Local Heating and Cooling Professionals Bayswater today and talk to one of our knowledgeable team members.

How Do Split Systems Operate?

Split air conditioning systems have their name because half of this system (condenser) being located outside the house while the other portion (fan coil) is located inside. When cooling, the hot air that is inside the room is absorbed from the fan coil and eliminated, resulting in cool air flowing back into the house. Reverse cycle allows that the heating system to operate in reverse in order to provide warmth on cold winter days.

The split system of air conditioning can be fitted to individual rooms, areas or even multiple rooms connected by copper piping connecting to the outdoor unit (condenser). Multiple-headed split-air conditioning units can be used in as many as nine rooms and only one outdoor unit as well as allowing separate temperature control for each room.

What Are The Running Costs With Split Systems?

One of the most recommended brands that we recommend for Split Systems is Mitsubishi Electric. For the Mitsubishi Electric GE Series 2.5KW Split System, installed in an area that is small, and provides regular cooling and heating throughout the summer and winter months and the annual running costs is $272.34.

Reduced the Split System Running Costs

It’s not hard to cut down on your operating costs by using the Split System. The model you purchase, and the star rating will determine just how you’ll save each year. However looking beyond the initial price to how you use the Split System can help as well.

Guide to Using A Split System

• Set the thermostat between 24C and 26, which is the ideal temperature for cooling. Each degree less in summer increases the running cost by about 10%..
• Use the economy setting when your split has one. You should also regularly maintain your air conditioner.
• Keep the sun’s heat away by closing curtains and blinds in the morning. Close all doors and windows in areas that are cooled when the split system is on.
• When the split system has been switched off , and the cooler outside, it is recommended to open the doors or windows and let the cool air inside.
• Insulate your property to help keep cool summer air out and keep the heat in during winter.
• Dress according to the weather.

Why Select Split Systems?

Air conditioning units mounted in wall are the most commonly used residential air conditioning system since they are inexpensive and simple to maintain.

Inverter Technology

Inverter technology is the mainstay for comfort all through the year because it maintains the temperature constant, cuts costs (less energy use) and generates less noise when employed. This is accomplished by controlling the compressor rotation speed more precisely.

Affordable

Wall mounted wall mounted split AC units are your best affordable option for a one room, apartment or small house as they are comparatively inexpensive to buy (depending on the number of indoor units you’ll need) and don’t need necessary duct work.

Independent Temperature Control

Each indoor unit is able to control the room that it is placed in, so each room could have different temperature.

Air Quality

Many HVAC systems that are split include air filters and humidity control mechanisms that regulate the amount of dust and humidity in the space. This can provide those with sensitive conditions (children or elderly, asthmatic or allergic customers) an ease of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems allow multiple indoor units to connect to a single outdoor condenser which provides the convenience of having the best air conditioner (in terms of output and physical restrictions) for a specific room.

Split System FAQ

Are split systems the same thing as an air conditioner?

Absolutely, Split System includes an air-conditioning unit. However, there are different types of air conditioning system includes;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

Each of these systems operates using refrigerant and electricity, based on the same principal but very different in terms.

How long will it take to set up a split system air conditioner?

In general an individual split air conditioning system installation will take 3-6 hours. The exact length of time could vary based on many factors such as below;

• Location and size of both indoor and outdoor unit
• The route of copper pipes between indoor and outdoor unit
• Electrical connections from the main switchboards to A/C unit.

More Split System FAQ's

Should I replace or repair my AC unit?

In most situation in the event that your air conditioner is at least 10-years-old and you notice obvious issues with your AC There is a high chance that it’s cheaper to replace then repair.

To help you make the right decision for your needs, speak with the team at ComfyHome for an honest opinion on the condition of your air conditioner.

What size of split system air conditioning do I need?

A typical measurements ratio is multiply the area of the room by a factor of 0.15 in order to determine the power of the unit in kilowatt.

If you have a room size that is 40 sqm, you’ll have a Split system air conditioning unit with 6 kW. A cooling unit of 2.5kW is suitable for 10-20 sqm rooms spaces.

However, the amount of the Split system’s required air conditioning is also affected by other factors like how well the insulation is in place, the quantity of residents and’ locations.

For a precise assessment of the necessary Split unit size, please contact us for a detailed analysis.

More Split System FAQ's

How long will an air conditioner split system last?

In general the air conditioner is built to last 10-20 years in the average. But this depends on a lot of elements, such as the brand of the A/C as well as the quality of the installation, regular service history, and so on…

It is essential to service Your Split System AC often for a longer life span and to increase effectiveness.

Do I need to wash my air conditioner air filter?

As per Daikin Australia, it is strongly recommended that you cleanse your air conditioning filters every two weeks to improve the efficiency of your system and possibly reduce your energy consumption by 5 to 15 percentage.

Bayswater Gas Heating Services

• Gas Heating Installation Bayswater
• Ducted Gas Heating Servicing & Repair Bayswater
• Gas Heating Repairs Bayswater
• Gas Heating Service Bayswater
• Evaporative Cooling Repair Bayswater
• Carbon Monoxide Testing Bayswater
• Gas Appliance Servicing & Repair Bayswater
• Gas Heating Bayswater
• Braemar Ducted Gas Heating Servicing & Repair Bayswater
• Bayswater
• Gas Log Fire Service & Repairs Bayswater
• Gas Space Heater Repair Bayswater
• Brivis Ducted Gas Heating Servicing & Repair Bayswater
• Vulcan Ducted Gas Heating Servicing & Repair Bayswater

What Types of Systems We Service & Repair

Every brand and type of heating requires its own maintenance and operation Our experienced technicians have the insight and expertise to provide first rate services across all kinds of heaters for example:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has many years experience with heating repair and maintenance with a focus on all models and models of heating systems. We pride ourselves on a rapid response time and dedication to efficiency, excellence and reliability.

We service and maintain the majority of leading brands of heating units and systems which include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Great Prices You Can Trust
• Professional Quality Workmanship Assurance
• Excellent Reputation & Reviews
• We’re friendly and personable.
• Experienced & Licenced Team
• Get a Quote With No Costs

Our Promise To You

At Melbourne Gas Ducted Heating we understand the frustration of not having hot water. This is something we do not believe anyone should be forced to endure. This is the reason we place such a high priority on hot water emergencies. Our experienced plumbers are reliable and friendly, without a doubt we are able to assist you in any circumstance.

We pride ourselves on the quality of our customer service. It is our conviction that the small things count the most.

We are proud of our outstanding customer service. Here’s why our clients love us:

• We always arrive when we promise to be there.
• Our technicians will give you the number to call them when they are 30 minutes away.
• Pricing upfront competitive and guidance before we start the job.
• Always getting our hands clean after us.

The staff at Melbourne Gas Ducted Heating offer emergency and maintenance services for plumbing, electrical and heating. If at any time you are unsure about our services and what we can offer, please contact us.