Split System Installation Albert Park

Split System Installation in Albert Park

There’s nothing more satisfying than coming home to a day and activating your split system air conditioning and in just a couple of seconds, the house and your family are cool.

Split system air conditioning provides such versatility, making them hard to beat. However, like all heaters and coolers that are required to run at their peak they should be serviced and maintained to the highest standard by qualified experts. Melbourne Gas Ducted Heating offers experienced technicians who are familiar with split system air-conditioners inside and out. They are experts in all makes and models of these units offering you assurance that we will complete the task to a professional standard.

We offer a variety of services that include the following:

• Split System Installation Albert Park
• Split System Repairs
• Split System Servicing

Our team comprised of HVAC and Cooling experts are fully qualified and licensed for all sorts of work. If you’re looking for Split System Installation Albert Park services then contact Local Heating and Cooling Professionals Albert Park today and talk to one of our knowledgeable team members.

How Do Split Systems Work?

Air conditioning splits are their name due to half that system (condenser) located outside the house while the other half (fan coil) is inside. When cooling, the warm air inside the room is absorbed via the fan coil and removed, resulting in cool air flowing back into the house. In reverse mode, it allows the heat pump to operate in reverse to provide heat on cold winter days.

The split system of air conditioning can be installed in individual rooms, areas or even multiple rooms joined by copper piping to an outdoor unit (condenser). Systems with multi-head splits are able to be fitted in more than nine rooms, with just one outdoor unit permitting an individual temperature control for each room.

What Are The Running Costs For Split Systems?

One of the most recommended brands that we recommend for Split Systems is Mitsubishi Electric. If you are looking for a Mitsubishi Electric GE Series 2.5KW Split System, installed in a small room providing regular cooling and heating during the summer and winter months, the annual running cost would be $272.34.

Reduced the Split System Operating Costs

It doesn’t take much to save on running expenses with the Split System. Depending on the model that you purchase, and the star rating will determine just how much you can save annually. It is important to look beyond the initial cost and how you use it Split System can help as well.

Tips For Operating A Split System

• Set the thermostat between 24C and 26C to allow for cooling. Each degree less in summer will increase your running costs by about 10%..
• Utilize the economy setting when your split has one and regularly service your air cooling system.
• Keep the sun’s heat out by closing curtains and external blinds during the day. Close doors and windows to areas being cooled when your split systems are on.
• When the split system is shut off and the cooler outside, open the doors or windows and let cool air inside.
• Insulate your property to help keep cool summer air out and keep the heat inside during winter.
• Wear clothes that are appropriate for the weather.

Why Select Split Systems?

Air conditioning units mounted in wall are the most frequently used residential air conditioning system, as they are affordable and easy to maintain.

Inverter Technology

Inverter technology is the key to more comfort throughout the year since it keeps the temperature constant, cuts costs (less energy use) and creates a lot less sound when it is employed. This is achieved through setting the speed of rotation more precisely.

Affordable

Wall-mounted wall mounted split AC system are most affordable option for a one room or apartment as they are relatively cheap to buy (depending on the amount of indoor units you will require) and there is no necessary duct work.

Independent Temperature Control

Each indoor unit is able to control the room that it is located in, so each room can have a distinct temperature.

Air Quality

A lot of HVAC systems that are split have air filtering functions and humidity control that regulate the amount of dust and humidity within the room. This allows for sensitive customers (children, elderly, asthmatic or allergic users) an ease of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems allow different indoor units to connect to one outdoor condenser, which gives you satisfaction of having the best air conditioner (in terms of output and physical restrictions) to a specific space.

Split System FAQ

Are split systems the same thing as an air conditioner?

Yes, Split System includes an air-conditioning unit. However, there are different kinds of air conditioning systems. It include;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Air conditioners that are duct-fed refrigerated

All these systems operate with refrigerant and electricity under the same principal but very different in terms of installation.

What is the time frame to install a split system air conditioner?

In general, a single split air conditioning system installation will last between 3 and 6 hours. The exact length of time may vary based upon a number of variables, including below;

• Dimensions and position of both the outdoor and indoor unit
• The routing of copper pipes between the outdoor unit and the indoor unit
• Electrical connections from main switchboards to A/C unit.

More Split System FAQ's

Should I replace or repair my air conditioner?

In most situation the air conditioner is over > 10 years old and you notice obvious issues with your AC, there is a good chance that it could be cheaper to replace then repair.

In order to help you make the right decision To make the right choice, talk to the experts at ComfyHome to get an honest opinion on the state of your air conditioner.

What size of split system air conditioning will I require?

A common measurement ratio is to multiply the size of the room by a factor of 0.15 to calculate the necessary power of the unit in Kilowatts.

For a room with a size of 40sqm, you should require a split system air conditioning unit with 6 kW. A unit that can cool the air at 2.5kW is suitable for 10-20 sqm rooms spaces.

However, the amount of the Split system’s required air conditioning can also be affected by other variables like the room insulation, quantity of residents and’ location.

For an accurate assessment of the Split units size please contact us for a detailed analysis.

More Split System FAQ's

How long does an air conditioner split system last?

In general, an air conditioner is constructed to last for 10-20 years on an average. However, it is contingent on a variety of things like the model of the AC it is installed on, the quality of its installation, regular service history, etc…

It is crucial to maintain the Split System air conditioner frequently to extend its life and increase effectiveness.

When should I clean my air conditioner’s filter?

Based on Daikin Australia, it is highly recommended that you take care to clean your air conditioning filter every two weeks to improve the system’s efficiency and potentially reduce energy consumption by 5 to 15 percentage.

Albert Park Gas Heating Services

• Gas Heating Service Albert Park
• Gas Heating Albert Park
• Gas Heating Installation Albert Park
• Carbon Monoxide Testing Albert Park
• Gas Log Fire Service & Repairs Albert Park
• Gas Heating Repairs Albert Park
• Gas Hot Water System Installation & Repairs Albert Park
• Braemar Ducted Gas Heating Servicing & Repair Albert Park
• Gas Space Heater Repair Albert Park
• Gas Appliance Servicing & Repair Albert Park
• Evaporative Cooling Repair Albert Park
• Brivis Ducted Gas Heating Servicing & Repair Albert Park
• Albert Park
• Vulcan Ducted Gas Heating Servicing & Repair Albert Park

What Types of Systems We Service & Repair

Each brand and style of heating comes with its specific operation and maintenance needs Our highly skilled technicians have the insight and experience to offer first rate services for all heating systems which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has years of experience with heating repair and maintenance and specialize in all types and brands of heating systems. We pride ourselves on having a rapid response time and dedication to excellence, efficiency , and reliability.

We are able to service and maintain the top brands of heating units and systems that include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Competitive Prices You Can Trust
• Quality Workmanship Guaranteed
• Excellent Reviews & Reputation
• We’re friendly, personable and polite.
• Professionally trained and licensed team
• Get a Quote Without Costs

Our Promise To You

At Melbourne Gas Ducted Heating we understand the frustration of not having hot water. It’s a situation that we would never want anyone to suffer through. That’s why we give such a high priority for hot water emergencies. All of our plumbers are trustworthy and friendly and without doubt, we will be able to help you in any situation.

We take pride in the quality of our customer service. It is our belief that even the minor things matter most.

We are proud of our exceptional customer service. this is why our customers love us:

• We will always be there when we declare that we will.
• Our experts will give you a call when they are thirty minutes away.
• Upfront competitive pricing and advice before we begin the work.
• Always cleaning up after us.

We at Melbourne Gas Ducted Heating offer emergency and maintenance services for electrical, plumbing and heating. If at any time you have some questions about our services, and the services we can provide.